| PART NUMBER | WIC-1DSU-T1-V2 |
| Description | Updated one-port T1/fractional T1 DSU/CSU WIC |
| Router families supported | 1700 (1720, 1721, 1751, 1760), 2600XMs, 2691, 3631, 3725, 3745, and ICS 7750 |
| Wet T1 Capable | Yes |
| Short Cable Length Command | Yes; used to configure attenuation for short cable lengths (<660 feet) |
| Network Equipment Building Standards (NEBS) | Yes: Type I/III |
| Cisco IOS Software Release | 12.2(15)ZL PCBU special [Cisco 1700 Series only] 12.2(17) Mainline 12.3(1) Mainline 12.3(1st)T |
| Support on IAD2430 Series | The IAD2431-8FXS, IAD2431-16FXS, IAD2432-24FXS, IAD2431-1T1E1 are supported on the following releases: 12.3(7)T4 12.3(8)T6 12.3(11)T2 Network clock participate was added, and is available in releases: 12.3(7)T6 12.3(8)T6 12.3(11)T2 |
| Width (mm/in) | 79/3.1 |
| Height (mm/in) | 21/0.8 |
| Depth (mm/in) | 122/4.8 |
| Weight (g/lb) | 62/0.14 |
| Transmit bit rate | 1.544 Mbps +/- 50 bps |
| Receive bit rate | 1.544 Mbps +/- 100 bps |
| Line code | AMI, B8ZS |
| AMI ones Density | Forced/bit robbing (N X56) High Level Data Link Control (HDLC) data inversion (N X64) |
| Framing Format | (SF) and ESF |
| Output level (LBO) | 0, -7.5, or -15 dB |
| Input level | +1 dB0 to -24 dB0 |
| Data Rates | N x 64 kbps (N = 1 through 24); nonchannelized N x 56 kbps (N = 1 through 24); nonchannelized |
| Interface connector | RJ-45 |
| System timing | Network and internal |
| Loopbacks | Network line loopback; user initiated Recessed push button for network line loopback; toggle on/off Network line loopback; telco initiated Network payload loopback Local date terminal equipment (DTE) loopback Remote line and payload loopback (codes: V.54 loop up, and loop down) |
| Self-Test | Self-Test activated by user |
| Test patterns (BERT) | 1:2, 1:5, 1:8, 3:24, QRW, All 0s, All 1s, user-programmable 24-bit patterns |
| Network (T1) alarms | Red alarm: Loss of network signal Blue alarm: Loss of network frame (AIS) from network Yellow alarm: Receive from network |
| Performance reports and error counters | Cyclic redundancy check (CRC), bipolar violation (BPV), OOF [EXPAND?], errored seconds, burst errored seconds, severely errored seconds, Ft and Fs framing errors for SF framing, FPS [EXPAND?] framing errors for ESF framing, 24-hour history stored in 15-minute increments |
| LEDs | CD (data carrier detect) LP (loopback) AL (alarm) |
| Telnet/console | Remote and local configuration, monitoring, and troubleshooting from Cisco IOS CLI |
| SNMP | Router and DSU/CSU managed by single SNMP agent; router, DSU, and CSU appear as a single network entity to user Standard MIB (MIB II) Cisco integrated DSU/CSU MIB RFC 1406 |
| SNMP traps | Generated in response to alarms |
| Regulatory Compliance | FCC Part 15 Class B TIA/EIA-IS-968 Industry Canada CS-03 Part II JATE Digital CAN/CSA-C22.2 No. 60950-00 UL 60950-2000 IEC/EN 60950 TS001 AS/NZS 3260 NEBS Type I/III |
| Standards | AT&T Pub 62411 ANSI T1.403 |
| Operating temperature | 0 to 40ºC (32 to 104°F) |
| Storage temperature | -20 to 65ºC (-4 to 149°F) |
| Realative humidity | 10 to 85 percent noncondensing operating; 5 to 95 percent noncondensing, nonoperating |
Only logged in customers who have purchased this product may leave a review.
Related Products
48 GIGABIT PORTS WITH OPTIONAL UPLINK CATALYST MANAGED LAYER 2 SWITCH, LAN BASE
Limited stock
ASA 5550 Security Appliance with SW, HA, 8GE+1FE, 3DES/AES, Cisco ASA 5500 Series Firewall Edition Bundles
Cisco Catalyst 2960-48TT-L – switch- 48 ports – managed – rack-mountable Series
Cisco Catalyst 3750X-48T Switch Layer 3 – 48 x 10/100/1000 Ethernet Ports – Data IP Base – Managed – Stackable
- Large, pixel-based LCD display that provides information such as date and time, calling party name, number, and digits dialed
- 6 programmable line and feature keys
- 4 dynamic soft keys to guide users through call features and functions
- Built-in headset port and high quality speakerphone with mute
Cisco Catalyst Switch 2960-24TT Layer 2 – 24 x 10/100 Ports – 2 x 1000BT – LAN Base Image – Managed
Delivers a wide range of security services with Active/Active high availability and Gigabit Ethernet connectivity
Strengthens security and reduces overall management and support costs while consolidating multiple security devices into a single appliance
Support for up to 25 VLANs
4 x RJ-45 1000Base-T, 1 x RJ-45 10/100Base-TX and 2 x USB USB 2.0 ports
The Cisco 3900 series offer unparalleled total cost of ownership savings and network agility through the intelligent integration of market leading security, unified communications, wireless, and application services.
Out of stock
24 Ethernet 10/100 ports with 2 x SFP uplinks. Cisco Catalyst 2960-SF Series Managed Fast Ethernet Switch
- 48 x Ethernet 10/100 PoE ports
- 2 x 10/100/1000 uplinks and 2 SFP uplinks
- Feature Set: LAN Lite
- DRAM: 64 MB
- 2 SFP uplinks
- 1000BASE-SX SFP transceiver module, MMF, 850nm, DOM
Reviews
There are no reviews yet.